Publicité
WARNING:
1.The camping bed should be assembled and disassembled by adults only.
2.Children should be supervised at all times.
3.Do not install or use the camping bed under adverse weather conditions
such as rain, hail, sleet, snow, drizzle, lightning, strong wind, etc.
4.Place the camping bed on a solid and level ground.
5.Keep away from fire and heat sources.
6. To avoid finger entrapment, assemble and disassemble the camping bed
carefully.
7. The camping set is designed for a maximum load of 300 lbs (136 kg).
Do not overload.
8. Do not jump on the camping bed. This is not a trampoline.
9. Make sure the camping bed is dry before storing in a safe place indoors.
TO AVOID PROPERTY DAMAGE OR SERIOUS INJURY, FOLLOW ALL
THESE INSTRUCTIONS.
NOTE: Be careful during the assembly process, or you may get hurt.
Make yourself familiar with the assembly process.
1.Unfasten the
2.Unfold the legs
velcro straps and
of the camping bed
put aside the two
and stand them on
bars.
a solid & level
ground.
4.Align a bar and
5.Stick the bend
insert it into the
joint of the bar onto
bed sleeve.
the middle frame of
the camping bed.
06
3.Expand the legs.
6.Fasten the bar.
7.Insert another
8. Connect the FRP poles and insert to the
bar on the
tent. Connect the four poles with a
opposite bed
junction cross diagonally.
sleeve and repeat
step 4-6.
9.Then insert
10.Put air bed and
another end of FRP
air pillow on the
poles into the
camping bed and
holes of the
inflate with a foot
camping bed.
pump.
12.Fully inflate air
13.When you only
bed.
use the tent,
please insert the
pole into the soil
and fix with
fastening nail. If
you need
sunshade, please
use nail and rope
to fasten it.
11.Coat the air bed
and pillow with the
cover. If it is hard
to put on, please
deflate some air.
07
Publicité
