Medion LIFE S61991 Notice D'utilisation page 121

8.4. Party LED light
Press the button () once or several times to activate preset party LED light effect L-1
to L-5.
The light front lights up to the beat of the music.
Press the button several times until L-OFF is shown on the display to deactivate all
party light effects.
9. Connecting a microphone
You can connect a microphone to the sound system.
Microphones can be used in all operating modes.
To connect a microphone, proceed as follows:
Switch off the sound system.
Connect the microphone to the microphone input MIC ().
Switch on the sound system.
Press the button () repeatedly until CU00 appears on the display.
Now select the desired microphone volume by turning the controller ().
9.1. Echo
You can use an echo effect variably.
Connect a microphone, as described in the previous section.
Press the button repeatedly until EC00 appears on the display.
Now select the desired echo effect by turning the controller.
9.2. Voice changer
You can select several voice changer effects.
Connect a microphone, as described in the previous section.
Press the button repeatedly until OFF appears on the display.
Now select the desired voice changer effect (H1 – H4) by turning the controller.
10. TWS mode
The TWS (True Wireless Stereo) function allows you to pair two speakers. By purchasing a
second speaker of the same type, it is possible to pair both speakers and use them as a stereo
speaker system.
Switch on the sound system.
Connect an external playback device to the sound system; this will become the master
system.
Now switch on the second sound system.
Enable Bluetooth® mode on the second sound system.
DE
FR
NL
ES
IT
EN
121