The control box and battery have the following features
1.
Emergency stop
2.
Charging lamps
3.
Display showing battery charge level
4.
Connection for charger cable
5.
Connection for base-width adjustment motor
6.
Connection for lift arm actuator
7.
Connection for hand control
8.
Electrical emergency lowering
9.
Handle for lifting battery
A tone sounding when using the lift indicates that the battery need recharging.
Charge the lift after use to ensure that the battery is always fully charged.
Lock the castor wheels when charging the battery.
1. Connect the charging cable to a power outlet and in the connection for charger cable.
The symbol for charging is shown on the display.
2. Check to ensure that the lamps on the control box light up. The green LED lamp
indicates that the charger is receiving power and the yellow LED lamp indicates that the
battery is charging.
3. Charging stops automatically when the battery is fully charged.
Wall-mounted charger.
1. Remove the battery pack from the lift and place it in the wall-mounted charger.
2. Check to ensure that the LED lamp on the front of the charger lights up.
NOTE!
Before the lift is used for the first time, it must be charged for at least 4 hours.
For maximum battery life, charge batteries regularly. We recommend daily charging when
the lift is used daily.
The emergency stop must be deactivated during charging.
I F U
Charging batteries
2
7
6
9
1
8
2
3
4
5
7