Direct Healthcare Group SystemRoMedic MiniLift160EE Manuel D'utilisation page 179

Using the product
Important Information
• The lift must be assembled according to the assembly instructions provided with the lift.
• The lift may only be used indoors and on a level floor.
• Lifting accessories must be properly trial fitted and tested in relation to the user's needs and functional ability.
• Do not leave the user unattended during a transfer situation.
• Under no circumstances may max. load be exceeded. See section on Safe working load.
• Ensure that the user's feet do not get caught between the footplate and the floor. Ensure that the user's feet do not get
caught between the footplate and the base when adjusting the base width.
• MiniLift200 is not intended for transporting users. It may only be used for short transfers.
• Never move the lift by pulling on the actuator!
Do not push
• The lift must not be used or immersed in or under water including showering.
• The lift should not be left / stored in a high humidity environment.
• The lift must not be charged in a wet room.
• To ensure optimal function, the lift must be inspected regularly. See section on Maintenance.
• Warranty applies only if repairs or alterations are done by an authorized technician.
• Using lifting accessories other than those approved by Handicare can entail a risk.
Trouble-shooting
If the lift or base-width adjustment cannot be activated, check the following:
- That the emergency stop button is not pressed in.
- That all cables are properly and securely connected. Pull out the contact and plug it in again firmly.
- That battery charging is not in progress.
- That the battery is charged.
If the lift unit is not working properly, contact your dealer.
If the lift unit makes unusual noises:
- Try to determine the source of the sound. Take the lift unit out of operation and contact your dealer.
SystemRoMedic
4
TM