Direct Healthcare Group SystemRoMedic MiniLift160EE Manuel D'utilisation page 203

Care instructions
Using Direct Healthcare Group's SystemRoMedic
products should feel good from start to finish.
Quality and environment
certification
Direct Healthcare Group is quality and environ-
ment certified in accordance with ISO 9001, ISO
14001 and ISO 13485. Direct Healthcare Group is
continuously and actively working to secure and
TM
develop the quality and the environmental thinking
within the company.
Direct Healthcare Group strives to ensure that all
textile products are Ökotex certified,
which ensures that they do not contain any
health-hazardous substances in dangerous
concentrations.
Tested and approved products
The assistive devices manufactured by Direct
Healthcare Group are of top-quality and fulfill
established standards for these types of medical-
and healthcare aids. All of our assistive devices
are CE-marked and many are patented. All of our
assistive devices comply with the requirements of
the Medical Devices Directive for Class 1 products
(MDD 93/42/EEC).
Functional materials
ULF™ (Ultra Low Friction) is the registered trade-
mark for Direct Healthcare Group's sliding material
which is used to achieve extremely low friction in,
for example, sliding mats.
Disposable and wipeable materials
facilitate infection control efforts
Direct Healthcare Group's SystemRoMedic™ range
offers an increasing selection of personal transfer
aids for short-term use. Instead of laundering, these
products are discarded after use, when they get
soiled or when the user no longer needs them.
This prevents the spread of multi-resistant and other
types of contagious bacteria.
Our wipeable transfer aids are made from a strong,
safe and comfortable material with a smooth and
soft surface and many practical features.
The surface of the entire product can be cleaned
using disinfectants. In fact, we call this material
"wipeable" but these products can actually be
dipped in water or used in the shower without
getting wet.
SystemRoMedic is a complete solution for easy transfers. The concept
TM
encompasses four product areas that meet most needs in different transfer situations.
Transfer, between two locations. Positioning, within the same location.
Support, for mobility. Lifting, both manual and mechanical.
© Direct Healthcare Group 200910 - Direct Healthcare Group
Protective covers
Most sizes of EasySlide can be fitted with a replaceable
protective cover, which is made of polyester and can easily be
cleaned. Most sizes of EasySlide and RollerSlide can also be
fitted with disposable covers, made of bio-degradable
polyethylene, which provide for even further improved hygiene
and less laundry.
Laundering and cleaning instructions
Laundry, cleaning and reconditioning of assistive devices is a
prerequisite for hygiene and safety as well as for of infection
control. General information on how to care for our products can
be found hereunder.
For more detailed information, please read the instrutions
on the product labels. Our products are continuously being
developed and improved, which is why we reserve the right to
make changes in products without prior notice.
Textile products
All of our textile manual devices can be washed in 60-80°C/
140-176°F water and tumbler-dried at low
temperature. Low temperature for tumbler-
drying is 45-50°C/104-120°F.
Do not use rinse/fabric softener and avoid
tumbler-drying for optimal service life. If disinfection is needed,
70 % ethanol, 45 % isopropanol or similar
should be used.
All of our textile lifting slings can be washed in
60-85°C/140-185°F water and tumbler-dried at
low temperature.
WendyLett, WendyLean, ReadyLett TopSheet
and IncoSheet can be washed in 60-90°C/
140-194°F water and tumbler-dried.
Plastic products
The surface of the product can be cleaned with warm water or a
soap solution. If disinfection is needed, 70 % ethanol, 45 %
isopropanol or similar should be used.
Mobile and stationary lifts
If necessary, clean the lift with warm water or a soap solution and
check that the castors are free from dirt and hair. Do not use
cleaning agents containing phenol or chlorine, as this could
damage the aluminium and the plastic materials.
If disinfection is needed, 70 % ethanol, 45 % isopropanol or
similar should be used.
w w w . d i r e c t h e a l t h c a r e g r o u p . c o m
English
™
90
194