Ryobi Y23GHP Manuel D'utilisation page 6

Activate (operating controls)
To move an operating control so that it is in a position that
allows the tool to be actuated or that satisifes one require-
ment for the tool to be actuated.
Actuate (tool)
To cause movement of the tool component(s) intended to
drive a fastener.
Air inlet port
In an air tool, the opening to which the compressed air supply
is connected, usually by means of a threaded fitting.
Dual actuation trigger system
An actuation system in which there are two triggers that must
be pulled in a specific sequence in order to drive a fastener.
Fastener
A staple, pin, brad, nail, or other fastening device which is
designed and manufactured for use in the tools within the
scope of this standard.
PRODUCT SPECIFICATIONS
Operating Pressure............................................. 70-120 psi
Magazine Capacity .........................................130 fasteners
Fastener size range ......................................... 1/2 in. - 1 in.
Fastener gauge type ...................... 23 gauge headless pins
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
GLOSSARY OF TERMS
Jam
An obstruction in the feed or drive areas of the tool.
Maximum air pressure
The maximum allowable pressure of the compressed air, as
specified by the manufacturer, for operating a tool.
Operating control
A control that separately, or as part of an actuation system,
can cause the actuation of a tool.
Trigger
A tool operating control activated by a tool operator's fingers.
Workpiece
The intended object into which a fastener is to be driven
by a tool.
FEATURES
Air Consumption.............................0.02 ft
Air Inlet .............................................................. 1/4 in. NPT
Weight ........................................................................2.2 lb.
ASSEMBLY
6 — English
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
/cycle at 100 psi
3