Pioneer BDR-WX01DME Manuel De L'utilisateur page 20

Connection
Checking the connection
When connection is complete, use the following method to check that the device is
correctly recognized by the computer's system.
1 From the [Control Panel], open [Device Manager] and open the CD-ROM or
DVD/CD-ROM item. Check that the product is correctly recognized by the
computer's system.
You can also right-click the Windows Start button to open "Device Manager".
2 Check that the drive icon is displayed.
Removal
Check that there is no disc in the drive, and remove the USB cable.
Be sure to connect the AC adapter included with the device before use.
Forcefully ejecting the disc
In the following situation, you can forcefully
eject the disc by using the forced ejection
hole.
• If the disc does not eject using the eject
button or through the software.
1 Check that the computer power is turned off, and that the disc has stopped
rotating.
2 Straighten a paper clip or similar object, and insert this straight into the
forced ejection hole and push hard.
3 The disc tray will come out by 5 mm to 10 mm, so pull out the tray and
remove the disc.
Note
• Never forcefully eject the tray while the disc is still rotating, as doing so may lead to
injury or damage to the disc.
• Do not place items within 14 cm of the front of the device, as doing so may obstruct
disc ejection.
20
BDR-WX01DME En