Pioneer BDR-WX01DME Manuel De L'utilisateur page 19

During data transfer, do not remove the USB cable.
(USB 3.0 or higher is
recommended)
Note
• It is recommended to connect to USB 3.0 port or above. If a USB 3.0 cable is
connected to a USB 2.0 port, the connection will be limited to USB 2.0 performance
standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB hub or using cables other than those specified
may result in faulty operation.
• The unit will not run on power supplied from the USB connector (bus power). Be
sure to use the unit with the AC adapter supplied with the unit connected.
• Do not use a USB cable or USB conversion adapter other than that included with
this device.
Caution
This product satisfies EMC regulations when shielded cables (with Ferrite-cores
attached) and connectors are used to connect the unit to other equipment. To
prevent electromagnetic interference with electric appliances such as radios and
televisions, use shielded cables (with Ferrite-cores attached) and connectors for
connections.
WARNING
Do not place the unit within the reach of young children as the USB conversion adapter
could be swallowed accidentally. In the event that a part is swallowed, seek medical
attention immediately.
USB Type-A
USB cable (accessory)
Connection
USB Type-B
BDR-WX01DME
19
En