Pioneer BDR-WX01DME Manuel De L'utilisateur page 16

Part Names and Functions
Front
1 Forced ejection hole
If the disc tray does not open even after pressing the eject button, the disc tray can
be opened by inserting a long, narrow item such as the end of a large paper clip
into this hole.
In normal use, open the disc tray by using the eject button.
When using the forced ejection hole, ensure that the power is turned off, and
wait for at least one minute for disc rotation to stop.
2 Busy indicator (BUSY)
Indicates the operational status as follows.
When power off
When operation stops
When operating
When reading
When writing
When tray opening/closing
• If there is no access for a certain period of time, operation will stop.
• Beware that electricity may be flowing even if the LED is off.
3 Eject button (h)
Opens and closes the disc tray.
• When this device is connected to a Mac
be used due to macOS
how to operate with a Mac.
4 Disc tray
Press the eject button to open the disc tray, and with the label side facing up, place
a disc in the tray aligned with the grooves.
Press the eject button, or lightly push the front of the tray to close it.
Do not forcefully pull the disc tray open.
16
BDR-WX01DME En
①
Off
Off
On
Flashing
Flashing
On
®
specifications. Please check the macOS User Guide for
④
② ③
®
with a disc inserted, this function cannot