Pioneer BDR-WX01DME Manuel De L'utilisateur page 13

handle the recording surface of the disc so that it is free from scratches, fingerprints,
dirt, dust, water, oil, salt, and other contaminants. If there are any contaminants or
dust, etc. on the disc, refer to "Cleaning" and remove such contaminants before use
while taking care not to damage the disc.
• Do not apply labels or adhesive tape, etc. to the label surface.
Returning the disc to the case
When returning the disc to the case, ensure that the disc label
surface is facing upward and press down the center (area
around the hole).
Storage
• When storing the disc, ensure that it is kept in the plastic case in which it was
purchased.
• Be careful not to let the recording surface of the disc come into contact with
anything.
• When storing, avoid high temperatures, high humidity, and direct sunlight, and store
in an environment free from external stresses.
Backup of important data
Mistakes in usage may accidentally damage the disc and result in data loss.
Accordingly, it is recommended to take backups (storing of both originals and
duplicates, etc.).
Unusable discs
• Do not use cracked or significantly warped discs. Doing so
may lead to a malfunction in the drive.
• When using old or rental discs, check that there are no cracks around the center
hole of the disc. Centrifugal force from high-speed rotation may enlarge these
cracks, causing the disc to break.
• Do not use discs with special shapes (heart-shaped,
hexagonal, etc.) or other non-standard discs. Doing so may
lead to a malfunction in the drive.
Cautions in Usage
BDR-WX01DME En
13