SilverCrest 379533 2110 Guide De Démarrage Rapide page 19

4. Place the splash guard 12 onto the drive
arm 13 from below. The arrow () on
the splash guard 12 and the arrow ()
next to the open lock symbol on the drive
arm 13 point to one another.
5. Rotate the splash guard 12 in the direc-
tion of the closed lock symbol until it
clicks into place.
6. Select the appropriate mixing tool.
7. Place the mixing tool 4/6/7 onto the
axle 10 from below.
Ensure that the metal pin on the axle 10
slots into the recess in the mixing tool.
8. Figure B: press the mixing tool 4/6/7
upwards slightly and rotate it in the di-
rection of the arrow until it stops.
Adding ingredients
• You can add ingredients into the mixing
bowl 5 while the drive arm 13 is lifted
up.
• During mixing, you can add ingredients
through the filling opening 11 in the
splash guard 12:
- Reduce the speed to 1 - 2.
- Add the ingredients.
DANGER of hand injuries by
crushing!
Never put your hands between the drive
arm 13 and the housing. There is a risk
of injury from crushing when folding
down.
9. Press the unlock button 1 and move the
drive arm 13 all the way down. The un-
lock button 1 pops out again.
17
GB