Publicité
Les langues disponibles
Les langues disponibles
0°, 18° and 36°).
4.
Release the lock button and check that the
brush head is properly locked.
Adjust the length of
the telescopic handle
1.
Unscrew the bottom part of the locking
screw.
FIG. 5
2.
Adjust the required handle length.
3.
Tighten the locking screw.
Choose the right brush
The power tool is supplied with one steel brush
and one nylon brush. The steel brush is suitable
for robust surfaces and stubborn weeds. The
nylon brush is recommended for vegetation and
surfaces that are sensitive to the steel brush.
NOTE:
•
Always start by testing the power tool on
a sample to see what effect the different
brushes have on different stone or paving
surfaces. Do not use the power tool on
sensitive materials like bricks.
•
Only use brushes that are in good
condition. Replace worn or damaged
brushes immediately.
Use
•
Always hold the power tool with both
hands.
•
Move the power tool along the space
between the flags.
•
For best results work at a steady pace.
•
Work the same place several times if
necessary.
MAINTENANCE
NOTE:
Always remove the battery from the power
tool before carrying out maintenance.
•
Always keep the safety devices, ventilation
openings and the motor housing free from
dust and dirt.
•
Wipe the power tool with a clean cloth and
clean places difficult to get at with
compressed air.
•
Do not use aggressive detergents. This can
damage the plastic parts. Check that no
water has got into the tool.
•
Clean the casing with a brush.
Storage
•
Remove the battery from the power tool
before putting it away for long-term
storage.
•
Store the power tool and accessories out of
the reach of children in a dark, dry and
frost-free place. The ideal storage
temperature is 5 – 30°C.
•
Store the power tool in the original pack.
EN
25
Publicité
