Bosch BPC3210 Notice D'utilisation D'origine page 12

English – 10
Start-up
Connecting the charger to the mains
(2) Device socket
(3) Device connector
Note the household voltage! The voltage of the
u
power supply must correspond to the specifica-
tions given on the battery charger nameplate.
Plug the device connector (3) of the power cable into
the device socket (2) on the charger.
Connect the power cable (country-specific) to the
mains.
Use only the supplied input connection: standard AC
power cord ((3) in the diagram) when connecting to
the household electrical supply.
0 275 U07 3CX | (08.03.2024)
Operation
(2)
(3)
Bosch eBike Systems