Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guidesbox.com
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Charging
Fully charge the batteries before you use the appliance for the first time
and when the batteries are empty. Fully charging the batteries takes up to
1 hour and 40 minutes.
Charge the appliance when the charging light lights up orange during use
to indicate that the battery is low and will run out soon.
Fully charged batteries provide at least 370 flashes at light intensity 5.
Fully charge the appliance every 3 to 4 months, even if you do not use the
appliance for a longer time.
Charge the appliance in the following way:
1
Switch off the appliance.
2
Insert the small plug into the appliance and put the adapter in the
wall socket.
The charging light flashes green to indicate that the appliance is
,
charging.
When the batteries are fully charged, the charging light
,
lights up green continuously.
Notes:
-
The adapter and the appliance feel warm during charging. This is normal.
-
You cannot use the appliance during charging.
-
This appliance is equipped with battery-overheat protection and does
not charge if the room temperature exceeds 40°C.
Never cover the appliance and adapter during charging.
3
After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.
Preparing for use
For optimal results and greatest effect, prepare the areas on which you
intend to use the appliance in the manner described below.
Preparing treatment areas
1
Shave the areas you intend to treat as long as you still experience
hair regrowth.
Note: If your last depilation method involved removing hairs by the roots
(e.g epilating, waxing etc.), wait until you notice significant hair regrowth before
you use Philips Lumea Precision Plus. Do not use depilatory creams instead
of shaving.
ENGLISH
13
Publicité
