Publicité
Belt Reset Button
Bouton de remise
en circuit
Botón de
restauración
FEATURES
Overload Protector
➢ The overload protector stops the
NOTE: Canister motor will continue to
run.
TO CORRECT PROBLEM:
➢ Turn off and unplug vacuum
➢ Check brush and brush support
➢ Clean jammed area.
TO RESET:
➢ Press the belt reset button on top of
Edge Cleaner
➢ Active brush edge cleaners are on
➢ Guide either side of the Power
- 34 -
Power Nozzle motor when the brush
jams and prevents belt breakage.
cleaner.
areas for excessive lint build-up or
jamming.
the Power Nozzle. Plug in and turn
on vacuum cleaner.
both sides of the Power Nozzle.
Nozzle along base-boards or next
to furniture to help remove dirt
trapped at carpet edges.
Publicité
