Publicité
Power Mop Mode (continued)
Sanitizing Hard Floors
BISSELL Hard Floor Sanitize formula is for use on hard, sealed floors only. Do not use on carpet or
area rugs. Read formula container label fully prior to use.
1. Follow cleaning instructions on page 7 to
remove visible soils.
To Sanitize: Using BISSELL Hard Floor Sanitize
formula and with machine in Power Mop mode,
make forward and backward passes. Solution
will dispense automatically.
Emptying the Dirty Water Tank
3. Press button on top of
4. Remove filter from lid.
dirty water tank and pull
Remove debris from mesh
out. Remove top of tank by
screen of lid.
grabbing lid in recessed area
on either side of filter to
remove.
6. Pour dirty water into sink
7. Replace strainer and dirty
and rinse tank.
tank lid.
8 BISSELL.ca
2. Allow floor to remain visibly wet with
formula for five minutes. This may require
additional passes in Power Mop mode.
5. Pull strainer tab up and out
of tank to separate debris from
dirty water. Dispose of debris.
8. Insert bottom of tank first.
Tilt tank towards machine until
it clicks into place.
Publicité
