Publicité
After-Cleaning Care
Important: Filter must be cleaned and dried after every use to maximize suction and performance.
Replace filter every 3 months.
1. Empty and rinse dirty water
2. Wash filter and screen
with warm water and mild
tank (pg 8). Remove filter from
top of tank by grabbing tabs
detergent. Rinse bottom of
on filter and lifting up. Remove
tank cover. Rinse all debris
any debris from under filter.
from dirty tank cover.
4. Hand wash brush roll and
5. Remove machine from dock
window with water and mild
to wipe out tray. Do not rinse
detergent.
tray under faucet to avoid
water entering charging plug.
7. Replace lid and strainer on
8. Insert right side of brush
dirty water tank, the filter at
roll first and rotate downward
the top. Insert bottom of tank
until tab on left side of brush is
into machine first. Tilt tank
locked in place.
towards machine until it clicks
into place.
Note: Any other maintenance or servicing not included in this manual should be performed by an
authorized service representative.
10 BISSELL.ca
3. Press button to release
brush roll window. Pull brush
roll tab to remove.
6. Leave all parts out to
dry for 24 hours before
reassembling.
9. Reinstall window by lining
up tabs on bottom edges of
foot and rotating towards
machine. Press down until
window clicks into place.
Publicité
