Publicité
Les langues disponibles
Les langues disponibles
▶
Never tamper with or modify the product or accessories in any way.
▶
When chiseling into ceilings, walls and floors, always make sure that you have a safe and firm
stance. A sudden break-through can affect your balance!
▶
Apply appropriate safety measures at the opposite side of the workpiece in work that involves
breaking through. Parts breaking away could fall out and / or fall down causing injury to other
persons.
▶
You and the other persons in the vicinity must wear suitable eye protection, a hard hat, ear
protection, protective gloves and light respiratory protection while the product is in use.
▶
Wear protective gloves when changing the accessory tool. Touching the accessory tool can result
in cuts and burns.
▶
Wear eye protection. Flying fragments can injure the body and eyes.
▶
Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural
stone and other products containing silicates; certain types of wood, such as oak, beech and
chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of
the operator and bystanders by means of the hazard classification of the materials to be worked.
Implement the necessary measures to restrict exposure to a safe level, for example by the use of a
dust collection system or by the wearing of suitable respiratory protection. The general measures
for reducing exposure include:
▶
working in an area that is well ventilated,
▶
avoidance of prolonged contact with dust,
▶
directing dust away from the face and body,
▶
wearing protective clothing and washing exposed areas of the skin with water and soap.
▶
Take frequent breaks and do physical exercises to improve the blood circulation in your fingers.
High vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶
Before beginning work, check the working area for concealed electric cables or gas and water
pipes. External metal parts of the product could give you an electric shock or cause an explosion
if you accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
▶
Wait until the product has come to a complete stop before you lay it down.
Description
1
Product overview
Chuck
@
Depth gauge release button
;
Depth gauge
=
Function selector switch
%
Forward / reverse switch
&
Intended use
The product described is a cordless (battery-powered) combihammer with pneumatic hammering
mechanism. It is designed for drilling in concrete, masonry, wood and metal. The product can also
be used for light to medium-duty chiseling on masonry and surface finishing work on concrete.
▶
Use only Hilti Li-ion batteries from the B 36 series with this product.
▶
Use only the Hilti battery chargers from the C4/36 series for these batteries.
*2173713*
2173713
Control switch
(
Battery state of charge / fault display
)
Release buttons / battery state of charge
+
display
Battery
§
Side handle
/
5
Publicité
