Publicité
Les langues disponibles
Les langues disponibles
I want to start Anynet+. I also want the connected devices to turn on when
the TV is turned on.
Check if the Anynet+ device is properly connected to the TV, and then select
Anynet+ HDMI-CEC
is set to On.
•
left directional button
Anynet+ HDMI-CEC
I want to exit Anynet+. It is inconvenient to turn on other devices because
the TV also turns on. It is inconvenient because the connected devices e.g.
set-top box turn off together.
To turn off the Anynet+ function of a device connected to the TV, turn off the
device.
•
left directional button
Anynet+ HDMI-CEC
When
Anynet+ HDMI-CEC
together with the TV. To prevent a speciic device connected to the TV from turning off automatically, turn off the
HDMI-CEC function on a speciic device connected to the TV.
The message "Connecting to Anynet+ device..." or "Disconnecting from
Anynet+ device" appears on the screen.
You cannot use the remote control when the TV is coniguring Anynet+ or switching to the TV viewing screen.
Use the remote control after the TV has completed the Anynet+ coniguration or has switched to the TV viewing
screen.
The Anynet+ device won't play.
You cannot use the play function when
Settings
Try Now
Settings
Try Now
is turned off, the soundbar connected via the HDMI eARC port does not turn off and on
Factory data reset
All Settings
Connection
All Settings
Connection
is in progress.
-
-
Anynet+ HDMI-CEC
menu to see if
External Device Manager
Anynet+ HDMI-CEC
function of the
External Device Manager
Publicité
