Publicité
Les langues disponibles
Les langues disponibles
Read before setting up a wireless network connection
Precautions for wireless network
• This TV supports the IEEE
connected to the TV via a Home Network may not play back smoothly.
Some of the IEEE
QN **D series supports the IEEE
For models other than the QN **D series, Samsung recommends using IEEE
• To use wireless network, the TV must be connected to a wireless access point or modem. If the wireless access
point supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
• Select a channel that is not currently being used by the wireless access point. If the channel set is currently
being used by the wireless access point to communicate with another device, the result is usually interference or
a communications failure.
• Most wireless networks have an optional security system. To enable a wireless network's security system, you
need to create a password using characters and numbers. This password is then needed to connect to a security-
enabled access point.
Wireless security protocols
The TV only supports the following wireless network security protocols. The TV cannot connect to non-certiied
wireless access point.
• Authentication Modes: WEP, WPAPS6, WPA PS6
• Encryption Types: WEP, T6IP, AES
In compliance with the Wi-Fi certiication speciications, Samsung TVs do not support WEP or T6IP security
encryption in networks running in the
Setup , you can connect the TV to your network using PBC Push Button Coniguration or a PIN Personal
Identiication Number . WPS automatically conigures the SSID and WPA key settings.
.
a /b /g /n /ac communication protocols. Video files stored on a device
.
communication protocols may not be supported depending on the model or geographical area.
.
a /b /g /n /ac /ax communication protocols.
. n mode. If the wireless access point supports WPS Wi-Fi Protected
- 66 -
. n.
Publicité
