EIBENSTOCK EHR 20 S Notice Originale page 15

Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in a
sturdy packing. The packing as well as the tool and its accessories are made of
recyclable materials which makes it possible to remove environmental friendly und
differentiated because of available collection facilities.
Noise Emission/ Vibration
The indication of noise emission is measured according to DIN 45 635, part 21.
The level of acoustic pressure on the work place could exceed 85 dB (A); in this
case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
Vibration emission value
Uncertainty
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Only for EU countries
Do not dispose of electric tools together with household
waste material!
In observance of the European Directive 2002/96/EC on
waste electrical and electronic equipment and its
implementation in accordance with national law, electric
tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
a
K
2
0,6 m/s
h
2
0,1 m/s
15