Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Note:
•
Ensure the supplied power is in correspondence with the value on the label.
•
Ensure the water tank is correctly fitted, otherwise the dehumidifier cannot be turned
on.
•
If the dehumidifier is turned off and then turned back on again immediately, it will take
approximately 3 minutes to reach full dehumidifying power (compressor requires time
to restart).
•
If the dehumidifier is switched off by a power cut, it will automatically switch back on
once power is restored.
•
The dehumidifier works best at normal room temperature, its efficiency is reduced if
the ambient temperature drops below 15 °C.
Switching On/Off the Unit
Connect the mains lead to socket.
Press Power button once to turn on the unit. By default, it runs in Manual Dehumidifying
Mode. Press the Power button once again to turn off the unit.
Humidity Setting Control
Press the Manual button once to enter Manual Dehumidifying Mode or to select the desired
level of humidity from CO-30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-CO.
Note:
•
CO stands for continuous dehumidification.
•
In the ecofort SMART App, CO will be displayed as 25%.
•
When target humidity is reached, the fan and compressor shut off. The fan is
activated every hour for 5 minutes in order to check humidity development.
80
|
Instruction Manual ecoQ DryAir 13L Complete
Publicité
