Publicité
Les langues disponibles
Les langues disponibles
A connected device is not being charged.
The battery is drained.
Charge the battery.
The device is not connected.
The device is not connected. Check that it is connected. Briefly press
the ON / OFF button
The current consumption of the connected device might be too low.
Check with your connected device manual and see if your connected
device current consumption comply with this product. The minimal
output current of the power bank is approx. 60 mA.
The power bank
pressed or when a device is connected, even though the
battery is charged.
The power consumption of the connected devices is too high.
Therefore, the internal overcurrent protection device was activated.
Reduce the number of devices connected and press the ON / OFF
button
.
6 ]
[
˜ Cleaning and care
This product has no internal parts requiring maintenance. Moisture
entering the product may result in damage.
Ensure no moisture enters the product during cleaning to prevent
*
damaging the product beyond repair.
Do not use abrasive, solvent-based or aggressive cleaners. These can
*
damage the surface of the product.
Only clean the product with a slightly damp cloth and mild washing-
*
up liquid.
˜ Storage during non-use
Store the product in a dry dust-free location, protected from direct
*
sunlight.
If the product is not used for a long time, the built-in battery should be
*
fully charged to prolong its operating life. Regularly charge the built-
in battery if you do not use the product for a long period of time. This
is necessary to preserve the battery.
to begin the charging process.
6 ]
[
does not react when the button is
3 ]
[
GB/IE
31
Publicité
