Important; Chain Saw Names And Terms - Remington LNT-2 Manuel D'utilisation Et D'entretien

FIGURES/FIGURAS/
FIGURES
Continued/Continúa/Suite
Flat File/Escofina plana/Lime plate
Depth Gauge Tool/
Calibrador de medida
de profundidad/Outil
pour limiteur de
profondeur
Figure 21 - Depth Gauge Tool On Chain
Figura 21 - Calibrador de medida de profundidad
en la cadena
Figure 21 - Position de l'outil pour limiteur de
profondeur sur la chaîne
Front Corner/Ángulo
anterior/Coin avant
Figure 22 - Round Off Front Corner Of Depth
Gauge
Figura 22 - Redondeo del ángulo anterior de la
medida de profundidad
Figure 22 - Arrondir le coin avant du limiteur de
profondeur
108539
Depth Gauge/Medida de
profundidad/Limiteur de
profondeur
Depth Gauge Slot/
Ranura de medida de
profundidad/Fente du
limiteur de profondeur
.025"
.635 mm
ELECTRIC CHAIN SAW
IMPORTANT: Read and understand this
manual before assembling or operating
this chain saw. Improper use of saw can
cause severe injury. Keep this manual
for future reference.
UNPACKING
1. Remove all items from carton.
2. Check all items for any shipping damage. If you find
any damage or if any parts are missing, promptly
inform dealer where you bought chain saw.
CHAIN SAW NAMES AND
TERMS
Process of cutting a felled tree or log into
Bucking
lengths.
Process of cutting down a tree.
Felling
Final cut when felling a tree. Make this
Felling Cut
cut on opposite side of tree from notching cut.
Located at front of saw body.
Front Handle
Front Hand Guard
guide bar. Protects left hand while using saw.
Metal bar that extends from saw body.
Guide Bar
The guide bar supports and guides chain.
Tip or end of guide bar.
Guide Bar Nose
Quick backward and upward motion of
Kickback
guide bar. Kickback may occur when tip of guide
bar touches an object while chain is moving. The
guide bar will kick up and back towards operator.
Process of cutting limb(s) from a felled tree.
Limbing
Low-Kickback Chain
kickback as required by ANSI B175.1.
Normal Cutting Position
ing bucking and felling cuts.
Notch cut in tree that directs fall of tree.
Notching Cut
System for oiling guide bar and chain.
Oiler Control
Chain saw without chain and guide
Power Head
bar. Also known as saw body.
Pushback (Kickback, Pinch)
saw. Pushback may occur if chain along top of guide
bar is pinched, caught, or contacts a foreign object.
Handle located at rear of saw body.
Rear Handle
Reduced Kickback Guide Bar
duces chance of kickback.
15
Shield between front handle and
Chain that reduces chance of
Stance used while mak-
Rapid pushback of chain
Guide bar that re-
www.desatech.com
®
Continued