sauermann Si-PRO-U-W Guide De Démarrage Rapide page 2

Quick Start Guide
English
These operating instructions describe how to install the Si-PRO-U-W and Si-PRO-U-I-100-H
probes properly.
Please refer to the operating instructions available at sauermanngroup.com for safe use of
the transmitters and detailed information.
Do not give these devices to a child.
1. Symbols used
For your safety and in order to avoid any damage of the device, please read carefully the
notes preceded by the following symbol:
2. Si-PRO-U-W probe
To install the probe on a wall,
make a cutting of Ø 25 mm in the
wall. Then drill 2 holes as shown
beside. Insert the probe into the
wall and fix it with the 2 screws
(supplied with the probe).
Important information about the probe mounting
Proper screw fixing: the screws have their heads flush with the filter
Please respect the following information about the probe mounting in order to avoid any
damage on the probe.
(a) = 18 mm (0.71'')
Drilling diagram
The probe is correctly fixed on the wall
and the tightness is guaranteed.