Installation; Before Installation - ETNA OM871RVS Mode D'emploi

Masquer les pouces Voir aussi pour OM871RVS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION

This information is exclusively for the installer who is responsible for assembly
and electrical connection. The manufacturer will not accept liability for possible
damage caused if you install the oven yourself.

Before installation

To move the oven, use the grips at the sides. Do not use the door handle to lift the oven.
When installing the oven under a counter, follow the instructions for installing it.
In general, protruding elements (furniture reinforcements, pipes, socket bases, etc.) at the
back of the unit must be avoided.
The unit in which the oven is installed and adjacent units must withstand temperatures
higher than 85 ºC.
The installation instructions must be adhered to strictly. If not, the oven's ventilation circuit
may become blocked, causing high temperatures that could damage the kitchen unit and
the appliance itself.
For this purpose, check the unit measurements and those of the holes to be drilled in the
units, as shown in the figures.
EN 13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Om871zt

Table des Matières