Publicité
Les langues disponibles
Les langues disponibles
Levixo 30-50 RTS
4.5. Mounting the boom
- Mount the boom in the open position (vertically).
- Secure the boom
4
The bracket
must be properly aligned with the boom support
1
- The balance is set for a nominal boom length (3 m for Levixo 30 / 5 m for Levixo 50). If the boom is cut, balance the boom
as indicated in paragraph 4.7.
4.6. Fitting the rubber edge (option)
- Position cover C1 by sliding it along the boom.
- Cut the rubber edge with an extra 2/3 cm over the length
of the boom to be protected.
- Slide the rubber edge into the groove provided.
- Position cover C2.
Note: We recommend securing the rubber edge to covers C1
and C2 using silicone adhesive to join the assembly
8
, using the bracket
1
with the bolts and washers provided
4
2
1
3
, on the boom support
5
is facing downwards.
2
.
5
3
Copyright © 2011 Somfy SAS. All rights reserved.
2
.
Publicité
