Publicité
Les langues disponibles
Les langues disponibles
Levixo 30-50 RTS
• Installation
Before opening the door of the housing, it is essential to ensure that the spring is released by moving the boom
to the vertical position.
- The barrier must only be used to allow vehicles to pass through. Pedestrians must not pass through the area in
which the automatic system is operating. It is necessary to provide a separate pedestrian route.
- Watch the barrier while it is moving.
-
- Any switch without a locking device must be installed in direct view of the barrier and away from any mobile parts. The
minimum height at which it must be installed is 1.5 m. It must not be accessible to the public.
- Dispose of packaging material (plastic, cardboard, polystyrene, etc.) according to the provisions of the current standards.
Do not leave nylon and polystyrene packaging within the reach of children.
- Ensure the installation instructions are kept where they can be consulted at any time.
• During installation of the barrier:
- Remove any jewellery (bracelets, chains, etc.).
-
- Use the appropriate tools.
- Do not connect to the mains supply until installation is complete.
- Be careful when handling the housing and boom to prevent any risk of injury.
• Power supply:
- In order to operate, the motor must be supplied with 230 V 50 Hz. The electric line should:
- solely be used for the motor,
- have a minimum cross section of 1.5 mm²,
-
circuit breaker with a 16 A rating) and a differential device (30 mA),
- be installed in accordance with the current electrical safety standards,
-
- Check whether the earthing system is performed correctly: connect all the metal parts of the assembly and all the
components of the installation equipped with earth terminals.
• Safety devices:
-
- Attach a sign to the structure which informs pedestrians that they are prohibited from passing through.
• Maintenance:
- Check the condition of the housing and boom assembly regularly. Any component found to be in poor condition must
tightened.
- Before carrying out work on the installation, switch off the power supply.
- Use only original parts for any maintenance or repair work.
Copyright © 2011 Somfy SAS. All rights reserved.
3
Publicité
