Publicité
Les langues disponibles
Les langues disponibles
17. Chain catcher
18. Clutch cover
19. Right hand guard
20. Throttle trigger
21. Throttle trigger lockout
22. Decompression valve
23. Combination wrench
24. Chain tensioning screw
25. Operator's manual
26. Transportation guard
27. Information and warning decal
28. Product and serial number plate
29. Vibration damping system, 3 units
Symbols on the product
Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Do not let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar tip touches an object. A kickback
causes a lightning fast reverse reaction that
throws the guide bar up and in the direction
of the operator. Can cause serious injury.
Chain brake, engaged (right). Chain brake,
disengaged (left).
1523 - 001 - 01.07.2020
Choke.
Decompression valve.
Idle adjustment screw.
High speed needle.
Low speed needle.
Adjustment of the oil pump.
Fuel.
Chain oil.
yyyywwxxxx
RedMax H42
11 T
18"
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle with
actuated chainbrake, CKA wb.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
Recommended cutting
equipment in this exam-
ple: Guide bar length 18
in, maximum nose radius
11 Teeth and chain type
RedMax H42.
3
Publicité
