Beverage Programming; 1. Programming For Self-Learning; 2. Programming From The "Beverage Settings" Menu - Philips SAECO Talea Ring Mode D'emploi

16

BEVERAGE PROGRAMMING

Every beverage can be programmed according to your individual tastes.

1. PROGRAMMING FOR SELF-LEARNING

You can program the quantity of coffee and/or milk you wish to be dispensed into the cups when you press
the button for any beverage.
Select the type of beverage you want to program, then press and hold the
(for example):
The machine dispenses coffee.
When the required amount is reached, press the
The display shows:
The dispensed quantity of coffee and/or milk is memorized and replaces any previous settings.

2. PROGRAMMING FROM THE "BEVERAGE SETTINGS" MENU

To adjust the settings for preparing beverages: press the
exit the programming mode.
(see page 18)
by navigating the click wheel with
settings for:
- the quantity of coffee to be
- the coffee temperature;
- prebrewing the coffee.
The following page describes how to program coffee beverages; the settings to set to program each beverage may
differ depending on the type of beverage.
programming
espresso
saved
espresso
In this phase you can:
1
brewed;
- select the quantity of coffee to be ground (opti-dose)
button again.
button and select "bev. settings" by
bev. settings
select the function to set:
- the coffee temperature;
- coffee prebrewing.
button until the display shows
restore factory settings
save the new settings.
or