Philips SAECO Talea Ring Mode D'emploi page 27

Note: before beginning the descaling cycle make sure that:
1. a large enough container is positioned under the water spout;
2. THE "AQUA PRIMA" FILTER HAS BEEN REMOVED.
1
3 maintenance
1.
2.
Descaling is carried out at a controlled temperature. If the machine is cold, you must wait until it has reached the
right temperature; otherwise you must cool the boiler as follows:
If the boiler needs to be heated, the machine does so automatically. When the heating stage is complete, the
"open water knob" message appears. Then proceed as described in point 5.
4
open
water knob
7
insert descaler
ok to start
When the following message
appears, the heater is at the right
temperature
2
3.2 descaling
1.
2.
5
Place a container beneath the
steam spout.
8
Pour the descaling solution into
the tank. Insert the tank into the
machine.
3
3.2.2 descaling
execute now
1.
2.
6
Turn the knob to the
reference.
9
insert descaler
ok to start
Press the button to start.
25