Publicité
Les langues disponibles
Les langues disponibles
Wireless Footswitch Operation
The included wireless foot-switch provides quick access to preset colors, color-change programs, and sound-activation
through the GigBAR Flex microphone. To use the foot-switch:
1.
Connect the GigBAR Flex to power. Turn the wireless foot-switch on.
2.
Press pedal #1 (Auto) to activate Auto program controls. When working, all the lights will begin in Auto mode
(AM01).
3.
Use the chart below to activate the desired function.
Pedal
Action
1 x press
2 x press
1
3 x press
(Auto)
4 x press
5 x press
1 x press
2 x press
2
3 x press
(Sound)
4 x press
5 x press
1 x press
2 x press
3 x press
4 x press
5 x press
3
(Color)
6 x press
7 x press
8 x press
9 x press
10 x press White, no strobe
4
N/A
(Blackout)
The GigBAR Flex footswitch will work properly in any mode, with a maximum unobstructed distance
of 50 ft (15.24 m). You must turn on the Wi-Fi on the GigBAR Flex before using the footswitch.
GigBAR Flex QRG Rev. 3
QUICK REFERENCE GUIDE
Function
Auto mode pars, kintas, and strobes (AM01)
AP01
AP02
AK01
APK1
Sound mode pars, kintas, and strobes (SM01)
SP01
SP02
SK01
SPK1
Red, no strobe
Green, no strobe
Blue, no strobe
UV, no strobe
Yellow, no strobe
Pink, no strobe
Cyan, no strobe
Dark Pink, no strobe
Dark Blue, no strobe
Immediately turns OFF all the light fixtures
EN
4
Publicité
