Publicité
Les langues disponibles
Les langues disponibles
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
You can power link up to 12 GigBAR Flex products on 120 VAC or up to 22 products on 230 VAC.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5.
Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting
clamp (x2)
(such as CLP-15
from Chauvet)
Safety cable
(such as CH-05
from Chauvet)
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
GigBAR Flex QRG Rev. 3
QUICK REFERENCE GUIDE
Safety
Notes.
Alternate
mounting points
Tripod (sold separately)
insertion point w/
adjustment knob for
tightening
EN
Mounting
bracket
Bracket
adjustment knob
(x2)
2
Publicité
