Publicité
Les langues disponibles
Les langues disponibles
To Start Snow Blower
1. Install the battery pack to snow blower.
2. Insert safety key and close cover.
3. Push the safety button and squeeze the auger trigger at same time.
And you can release safety button after auger turning.
To Stop Snow Blower
1. Release the auger trigger.
2. Remove safety key.
3. Remove the battery pack and store in a secure location out of the reach of children.
WARNING: The thrower will turn off automatically after 5 seconds of stop operation.
Adjusting Chute
The chute can be adjusted to change both the direction and the distance of the discharged snow to assist you in
moving snow away from one area and placing it in another.
The throwing distance of the snow blower is adjusted by moving the chute deflector up or down.
1. Loosen the knobs to raise or lower the deflector to the desired degree of snow you wish to throw. Tighten
the knobs to secure the deflector. (Fig.6)
The direction of snow removal can be adjusted up to 180°.
2. You can adjust chute direction by pushing the chute control handle in chute. (Fig.7)
Chute Control Handle
Auger Trigger
Fig.6
Fig.7
10
Safety Button
Fig.5
Publicité
