Publicité
Les langues disponibles
Les langues disponibles
KNOWING YOUR SNOW BLOWER
Please use the illustration below to familiarize yourself with the location and function of the components that
control of your snow blower.
1
LED Switch
2
Safety Button
3
Auger Control Trigger
4
Panel
5
Knob
6
Chute Control Handle
7
Chute
8
LED Light
9
Deck
10
Auger
11
Wheel
Safety Button
Located on the right of the panel,the safety button must be pressed down before motor can be started.
Auger Control Trigger
Located on the right side of the panel, the Auger Control Trigger is used to engage and disengage the augers.
Squeeze the Auger Control Trigger to engage the augers; release to disengage the augers.
Clean-out Tool
It is used to clean the chute assembly and chute opening when snow and ice become lodged.
WARNING! Never use your hands to clear a clogged chute assembly. Shut off machine and remain behind
handles until all moving parts have stopped before unclogging.
LED Light
Located on the front of the machine,this feature provides extra light for increased visibility.
12
Lower Handle
13
Middle Handle
14
Upper Handle
15
Battery Pack
not included)
16
Charger
included)
Clean Out Tool
17
Battery Box
18
8
Fig.1
( Model#HB2801
( Model#HB2801 not
Publicité
