IME MF72421 Mode D'emploi page 29

Nemo 72 Le
1.2 Connection
↑
↵
selects the connection
Confirms
Select the desired connection and scrupulously respect the linked wiring diagram.
The selectable wiring diagrams are:
Symbol Line
1N1E Sigle-phase
3-1E 3-phase 3 wires
3N1E 3-phase 4 wires
3-2E 3-phase 3 wires Unbalanced
3-3E 3-phase 3 wires Unbalanced
3N3E 3-phase 4 wires Unbalanced
1.3 Current delay time and average power
Selectable delay time: 5, 8, 10, 15, 20, 30, 60 minutes
The selected time is valid both for the current and the average power
↑
↵
selects the time value
confirms
1.4 Display lighting
The 4 selectable levels (0 – 35 – 70 – 100%) %) show the display lighting percentage
↑
↵
selects the lighting level
confirms
8
Load Coils Wiring
- 1 S 1000/251
Balanced 1 S 1000/447
Balanced 1 S 1000/448
2 S 1000/166
3 S 1000/446
3 S 1000/164
1.5 Run hour meter count start
Select the quantity which starts the run hour meter count:
1.5a Voltage count start
Voltage: count start with phase voltage > 20V
↑
↵
selects voltage or current
confirms
Connection
1.5b Power count start
↑
↵
selects voltage or power
Aron L1 - L3
confirms
Power: total active power, programmable value 0,5...50%Pn
→
↑
moves the cursor
↵
increases the loaded value
confirms
1.6 RS485 Communication
According to the models, this meter can be without communication or equipped with
RS485 ModBus RTU / TCP or RS485 BACNET
1.6a RS485 ModBus RTU / TCP Communication
→
Address number::
↑
moves the cursor
↵
increases the loaded value
confirms
communication.
1...255
01/16 10783331 WEB E cod.MF72...
Voltage or Power.
(rated power)