Publicité
Les langues disponibles
Les langues disponibles
3. Add and connect device
1) Insert the power plug and turn on the power switch. Choose "Stand by" mode by pushing the "
" button
until the "Stand by" symbol is displayed. Keep pressing "
" for more than 5 seconds and the icon "
" will
flash.
2) Press "+" icon on right top page or the "Add Device" button in the middle page to start adding device.
3) There are 2 methods to connect the service:
Method 1: Press "Add" button in the middle page(in this case, you need to keep your phone bluetooth on).Then
enter the Wi-Fi password . Press "next" to start connecting. (Now only 2.4G Wi-Fi is supported. Please make
sure your Wi-Fi is 2.4. )
EN-24
Publicité
