Publicité
Les langues disponibles
Les langues disponibles
To hang the heater on the wall:
1. Choose a suitable installation location for the
heater. Follow the minimum distances in all
directions (Fig 1). Disassemble the wall bracket by
loosening the screw (not screw off, only loosen)
and sliding the metal pieces out of the hole. Take
out the bracket by pulling it down.
2. Verify that the bracket is perfectly horizontal with
Fig 3
a spirit level and mark the location of holes on the
wall. Drill holes in the wall for the pegs with a
Fig 2
suitable drill bit. Insert the pegs into the holes, then
screw the wall mount bracket securely onto the
wall (Fig 2).
3. Place the heater against the bracket. Fix the
heater on the 2 downwards hooks. Pull the heater
upwards whilst keeping it in the 2 lower hooks. Fix
the heater on the 2 upwards hooks. Pull the heater
down. Slide the 2 metal pieces on top into the hole,
and fasten the screws to lock the wall mount
bracket (Fig 3).
EN-7
Publicité
