KINZO 871125218213 Manuel D'utilisation page 9

Warning:
1. That the vibration emission during actual use of the power tool can
differ from the declared total value depending on the ways in which
the tool is used;
2. of the need identify safety measures to protect the operator that
are based on an estimation of exposure in the actual conditions of
use (taking account of all parts of the operation cycle such as the
times when the tool is switched off and when it is running idle in
addition to the trigger time).
IMPORTANT
Wear ear muffs and goggles.
Parallel cuts
1. Release the lock screw
2. For 90 cuts, adjust the parallel
Stop 2 using the scale on groove
A . For 45 cuts adjust the parallel stop 2 using the scale on groove.
B. Observe the saw blade with.
3.Tighten the lock screw.
Important!
First make a trial cut.