Publicité
Les langues disponibles
Les langues disponibles
in all angles and depths of cut.
b) Check the operation of the lower guard spring. If the guard
and the spring are not operating properly, they must be
serviced before use.
Lower guard may operate sluggishly due to damaged parts, gummy
deposits,
or a build-up of debris.
c) Lower guard may be retracted manually only for special cuts
such as "plunge cuts" and "compound cuts". Raise lower guard
by retracting handle and as soon as blade enters the material, the
lower guard must be released. For all other sawing, the lower guard
should operate automatically.
d) Always observe that the lower guard is covering the blade
before placing saw down on bench or floor. An unprotected,
coasting blade will cause the saw to walk backwards, cutting
whatever is in its path. Be aware of the time it takes for the blade to
stop after switch is released.
Saw Blade Safety Warnings:
a) Only use saw blade recommended and only use saw blades if
you have knowledge of how to use handle them.
b) Pay attention to the maximum rotational speed. The maximum
rotational speed marked on the saw blade shall not be exceeded,
where stated, the speed range shall be adhered to.
c) Do not use saw blade which are cracked. Repairing is not
permitted.
d) Use the supplied saw blade only for cutting of wood, never for
metal or plastic.
Longer period using may lead overheating the blade tips,. therefore
take breaks of approx 15minutes on a regular basis to let the blade
tips cool down.
RESIDUAL RISKS
The following risks are typical for the use of this machine.
• Injuries caused by touching the rotating parts, especially the blade
• Injuries caused by breakage of the saw blade
In spite of the application of the relevant safety regulations,
the implementation of safety devices and the use of the tool in
accordance with the instructions, several residual risks cannot
be avoided, e. g:
• Impairment of hearing when using inappropriate hearing protection.
Publicité
