KINZO 871125218213 Manuel D'utilisation page 11

Important
Pull out the plug before making any changes to the circular saw!
Switching on
Before pressing the on/off switch, check that the saw blade is properly
fitted, that the moving parts run smoothly and that the clamping screws
are tight.
Changing the saw blade
1. Open the hinged guard hood and hold.
2. Remove the flange and the saw blade by dropping down and out.
3. Clean the flange and insert a new blade. Note the direction of
rotation(see arrow on the guard hood).
4. Tighten the screw and check for concentricity.