ETNA A3415 Notice D'utilisation page 26

Electronic programming clock
Setting the time on the clock
On connecting the oven, you will notice that
'12:00' appears in the display and that a light
begins to flash next to the
the '+' and '-' buttons, the correct time can be set
on the clock, which is subsequently stored and the
flashing light goes out.
Manual use
After setting the correct time, the oven is ready for
use. Select a temperature and a cooking function.
To switch off the oven, set the selectors to the
position '0'.
Warning function
1 Press the MODE button until the signal next to
the symbol begins to flash.
2 Choose the time when you want the alarm to
sound, pressing the "+" or "-" button.
3 Subsequently, the light will remain on,
indicating that the alarm is programmed.
4 At the end of the programmed time, an alarm
will sound and the light will begin to flash.
5 Press any button to turn off the alarm. The light
goes out and the screen shows the current time
again.
symbol. By pressing
Programming the cooking time
1 Press the MODE button until the indicator next
to the symbol begins to flash.
2 Select the length of the cooking time by
pressing the '+' or '-' button.
3 Subsequently, the indicator that was flashing
will light, indicating that the oven will switch
itself off automatically.
4 The display will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed, the oven
will switch off, an alarm will sound and the
indicator will begin to flash.
7 Press any button to switch off the alarm, the
oven switches on again.
8 Set the selectors in the position '0' to switch
off the oven.
Programming the end of cooking time
1 Press the MODE button until the indicator next
to the symbol begins to flash.
2 Select the time that the cooking has to end by
pressing the "+" or "-" button.
3 Subsequently, the indicator that was flashing
is lit, indicating that the oven will switch itself
off automatically.
4 The display will now show the current time.
5 Select a temperature and cooking function.
6 When the programmed time is reached, the
oven will switch off, an alarm will sound and
the indicator will begin to flash.
7 Press any button to switch off the alarm and
the oven will switch on again.
8 Set the selectors in the position '0' to switch
off the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.