ACCURAT ARX 5200 Manuel D'instructions page 33

10. Communication
10.1. RS484 and UART communication
Various information about the battery status can be monitored through the host
computer, including battery voltage, current, temperature, and battery information.
Use RS484 and UART ports to connect your computer to the battery and monitor the
battery status and performance. The default baud rate is 9600 bps.
10.2. CAN bus communication
Environmental configuration: Before installing the USB driver on your computer,
check the operating system first. The 32-bit operating system matches the file suffix
"x86", while the 64-bit operating system matches the file suffix "x64". You can view the
port in the device manager to check whether the installation is successful.
Connection method: Insert the USB cable of the communication box into the USB
port of the computer and connect the other end to the corresponding interface of the
battery protection board.
Communication format: CAN_ID_0 is selected by default for ID, CAN device is selected
according to the type of communication box, the baud rate is 500K by default, and
channel selection is 0 by default.
33