Telefunken TFL1960B09 Mode D'emploi page 42

Les langues disponibles

Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.

S/PDIF Coaxial Out

Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that

you subscribe to. For more information, see "Conditional Access" section.

Side USB input.

TV control buttons.

Side audio-video connection

of external devices. To make a video connection, you must use the supplied AV

connection cable for enabling connection. First, plug singular jack of the cable to the

TV's Side AV socket. Afterwards, insert your video cable's (not supplied) connector into

the YELLOW input (located on the plural side) of the supplied AV connection cable.

Colours of the connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV

connection cable. Afterwards, insert your device's audio cable's connectors into

the RED and WHITE jack of the supplied side AV connection cable. Colours of the

connected jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE)

to enable sound connection when connecting a device to your TV by using PC or

COMPONENT VIDEO input.

Headphone jack is used for connecting an external headphone to the system. Connect

to the HEADPHONE jack to listen to the TV from headphones (optional).

02_MB60_[GB]_1825UK_IDTV_BRONZE17_19905W_LED_10070018_50176084.indd 40

outputs digital audio signals of the currently watched source.

input is used for connecting video and audio signals

English - 40 -

07.09.2010 09:24:26