Télécharger Imprimer la page

KitchenAid KSSC36FMS Guide D'utilisation Et D'entretien page 6

Masquer les pouces Voir aussi pour KSSC36FMS:

Publicité

Les langues disponibles

Les langues disponibles

EXTENDFRESH
Temperature
Hanagement
System
The ExtendFresh Temperature Management System
controls the temperature
in both the refrigerator
compartment
and the freezer compartment
independently.
The system helps extend the freshness of the food in your
refrigerator by responding to temperature changes as
small as 1.5°F. Unlike most refrigerators on the market
today, the ExtendFresh System uses a Smart* Fan to
transfer cold air immediately from the freezer to the
refrigerator for faster response to temperature changes
without the need for the compressor to turn on. Also, the
system maintains consistent temperatures,
which are not
affected by external temperature changes such as
seasonal changes and programmable home thermostats
or even the temperature of other compartments
inside the
refrigerator.
L
Setting
temperature
ontrols
The Refrigerator and the Freezer Controls have been
preset at the factory. These settings should be correct for
normal household refrigerator use. Let the refrigerator
operate for 24 hours to cool both sections before
changing settings.
To change a temperature setting:
Adjust the Refrigerator and/or Freezer Control.
• To make the refrigerator or freezer colder, turn the
control knob clockwise.
* To make the refrigerator or freezer less cold, turn the
control knob counterclockwise.
IMPORTANT: The OFF setting on the Freezer Control
stops all cooling action in the refrigerator, but it does not
disconnect the refrigerator from the power supply.
If possible, wait to add food until after this 24-hour period.
Turning the controls to higher number settings will not
cool the sections faster. Adding foods before the
refrigerator has cooled completely could cause the
refrigerator to take longer to reach the desired
temperatures and cause some foods to spoil.
After 24 hours, adjust the controls, one number at a time
as desired. "1" is the warmest setting and "5" is the
coldest. Allow the refrigerator to operate for 24 hours after
each control change.
V
!
5
Cold
Colder
Refrigerator Control
v
1
5
Cold
Colder
Off
Freezer Control

Publicité

loading