Publicité
Les langues disponibles
Les langues disponibles
Removing
the
ice maker
storage
bin
Depending on the model, the ice maker storage bin holds
the following amounts of ice:
36"-
8.5 pounds (3.9 kg)
42" - 13.5 pounds (6.1 kg)
48" - 17.6 pounds (8.0 kg)
Remove and discard unused ice periodically to reduce the
potential for off-taste or odor buildup in ice. The storage
bin can be removed for cleaning or to dispense large
amounts of ice at one time,
To remove:
1. Pull the ice maker cover panel out from the bottom and
slide it to the rear.
2. Lift the ice maker wire arm until you feel it click into the
"OFF" position.
For dispenser models only: While the ice maker is
"OFF," no more ice can be produced, but ice can still
be dispensed when the freezer door is closed.
3. Lift the front of the storage bin, then pull it out.
4. Empty the storage bin. Use hot or warm water to melt
ice if necessary. Never use anything sharp to break up
ice in the storage bin. This can damage the storage bin
and the dispenser mechanism.
To replace:
1, Push storage bin in all the way.
2, Lower the ice maker wire arm down to the "ON"
position to restart ice maker.
3. Lower the ice maker cover panel.
Ice maker
cover panel
down
Ice maker
cover panel
up
J
s_
sin
_T
q
12
Publicité
