Insert the funnel into the opening on the salt container and fill it with 1 kg of
dishwasher salt. It is normal for water to come out of the salt container (11).
Once the container has been filled, twist the lid clockwise to tighten.
To prevent damage to the appliance, a quick program without dishes or dish-
washer detergent should be started immediately after filling with salt (see sec-
tion "8. Starting the wash program" on page 151).
.. Adding rinse aid
NOTICE!
Risk of damage to the appliance
Using incorrect rinse aid may damage the appliance.
Only fill with pure rinse aid for dishwashers. Rinse
aids with washing or other additives are not suitable.
Fig. 9
Open the appliance door.
Twist the lid of the rinse aid container (6) anticlockwise to the left arrow and re-
move the lid (see Fig. 9).
Fill the rinse aid up to the "MAX" mark (see Fig. 10). Make sure the container
does not overflow.
Replace the lid with the arrow tip onto the left arrow again and twist it clockwise
onto the right arrow (see Fig. 11).
Remove surplus rinse aid with a damp cloth after filling and close the lid.
Fig. 10
DE
FR
NL
ES
IT
EN
Fig. 11
149