Medion MD 37496 Guide De Démarrage Rapide page 146

... Feeding the hose into an drain pipe
NOTICE!
Possible material damage!
Material damage is possible in the event of water leak-
age.
 Make sure that the outlet hose is always introduced
into an outlet at a height of 60 cm, as otherwise the
pump performance would be impaired.
 Under no circumstances should the hose end be
submerged.
 Ensure that the inlet and outlet hoses are not kinked
or crushed.
 You can also feed the outlet hose into a drain pipe. Hook the hose into the drain
pipe in such a way that it cannot come loose and the water drains directly down-
wards unhindered (see Fig. 6, B).
 The outlet hose can be extended by max. 100 cm. Use an extension with an
internal diameter that is at least the diameter of the original hose or a suitable
connecting piece.
 The hose extension should run along the floor – only the section of hose near
the draining point should run upwards.
.. Connecting to power supply
 Once you have connected the washing machine to the water supply and drain-
age, connect the power plug to a power socket.
 The socket must be easily accessible so that you can unplug the appliance from
the mains quickly if necessary.
DE
FR
NL
ES
IT
EN
147