Publicité
Les langues disponibles
Les langues disponibles
2 Safety
(EN-GB) UK Declaration of Conformity
Manufacturer
Importer UK
Authorized person for the
technical documentation
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product
Description
Designation
Trade name
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the UK designated standards used listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union harmonisation
legislation
UK designated standards used
Alten-Buseck, 20.09.2021
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving:
2 Safety
Please observe the attached "Safety Instructions" document.
2.1 Designated use
• The device described in these instructions may be used only for the purpose and in the manner described in these
instructions. When doing so, please observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.
2.2 Obligations of the operator
Ensure that only qualified personnel are permitted to perform work on the device or system.
• Authorized personnel are:
• those who are familiar with the basic regulations and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and experience.
EN - 4
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
ABICOR BINZEL (UK) ltd.
Binzel House, Mill Lane, Winwik Quay
Warrington WA2 8UA
United Kingdom
Mark Owens
Address
see address of Importer UK
The torch cleaning station is used for automatic cleaning of the gas
nozzle interior and gas nozzle front in MIG/MAG welding torches within a
robot cell.
Torch cleaning station
Function
BRS
Type
Supply of Machinery (Safety) Regulations 2008
S.I. 2008/1597
Electromagnetic Compatibility Regulations 2016
S.I. 2016/1091
The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
S.I. 2012/3032
ISO 12100:2010
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-6-2:2005
IEC 63000:2018
Document no.: 04-04-2021
20 September-2021
Gas nozzle cleaning
LC
BRS-LC
BAL.0030 • 2022-03-31
Publicité
