Silhouette SPRWBC052D3SS Manuel Du Propriétaire page 15

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
MODEL SPRWBC052D3SS-P
If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
This appliance has the capability of the door opening from either the left or right side. The appliance
is delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please follow the instructions below.
1. Open the door, unscrew the two screws (5) of the door axis (6). Move the door (7) outward and then
downwards in the direction of the arrow and place the door in a safe place. See Fig A/B.
2. Unscrew the two screws (10) of the top right door hinge (8), remove the top right door hinge (8) and
then take out two decorative nails from the accessory bag to plug the right door hinge hole. See Fig C.
3. Remove the decorative nail (12), then take out the left top hinge from the accessory bag and fix it to the
upper left corner of the case with two screws. See Fig D.
4. Unscrew the two screws of the bottom right hinge (2), remove the bottom right hinge (2). Take out the
two decorative nails from the accessory bag to plug the hole of the bottom right hinge. See Fig A.
5. Remove the decorative nail (1), then take out the bottom left hinge (15) from the accessory bag and fix
it on the bottom left corner of the case with two screws. See Fig F.
6. Remove the door axis of top right hinge (9) and the plate of the bottom right hinge (3) from the top
right corner and the bottom right corner of the door respectively. Take out the door axis of top left hinge
(13) and the plate of bottom left hinge (14) from the accessory bag, install them in the top left corner
and the bottom left corner of the door respectively. See Fig A/B/E/F).
7. Insert the door axis (6) removed earlier into the hole of the plate of the bottom left hinge (14), align
the hole of the door axis of top left hinge (13) with the core of the top left hinge. Move the door first
upward and then inward to tighten the screws of the door axis (6). See Fig E/F.
14